SUNLU PETG Red 175mm 3D Printer Filament 1kg

Tangle Free & No Plugging Better flow of SUNLU no plugging premium 1.75mm PETG filament. It has consistent diameter & roundness, less stringing and warping, strong layer adhesion. Article-free and impurity-free.High Precision +/- 0.02mm Tolerance 1.75mm PETG 3D filament(Tolerance Level : ? 0.02mm). Full 1KG 3d printer filament reel, perfect roundness and very tight diameter tolerance , approximately 325 m of filament on each spool ease of use, minimal warping, no clogging, no bubbles. Increase your 3d printing objects delicacy.Rigid, Tough, High Performance 3D Printing Material 3d filament PETG 1.75 is a rigid, tough, high performance material, offering excellent clarity, light transmission and high gloss. It's about as stiff as PLA. and is highly resistant to temperatures at above 60?C(140?F).Recommended Printing Temp/Nozzle Temperature PETG 3d filament suggest printing temperature is 220-250?C - Base Plate Temperature: 70-80?C if no glue applied.99% FDM 3D Printer High Compatibility Compatible with 99% FDM 3D printers (with heated beds): Reprap, Afinia, MakerBot, PrintrBot, UltiMaker, Airwolf, Makergear, Up!, Lulzbot, Flashforge, Solidoodle, Delta, Mbot, Type A.SUNLU PETG 3D Printer FilamentSUNLU PLA Filament is are made of premium PLA material (Polylactic Acid), which boasts complete biodegradation and lower melting temperature, even does not need a heated bed, with no odor during the printing.It is suitable for fast printing and printing large-sized models, printed products have flat and smooth surfaces.FAQWhy can't the filaments stick to the hotbed easy?1). Check the temperature setting before printing, PETG filament temperature about 220-250;2). Check if the plate surface has been used for a long time, it is recommended to apply PVA glue;3). If the first layer has poor adhesion, it is recommended to re-level the print substrate to reduce the distance between the nozzle and the surface plate;
Tangle Free & No Plugging Better flow of SUNLU no plugging premium 1.75mm PETG filament. It has consistent diameter & roundness, less stringing and warping, strong layer adhesion. Article-free and impurity-free.High Precision +/- 0.02mm Tolerance 1.75mm PETG 3D filament(Tolerance Level : ? 0.02mm). Full 1KG 3d printer filament reel, perfect roundness and very tight diameter tolerance , approximately 325 m of filament on each spool ease of use, minimal warping, no clogging, no bubbles. Increase your 3d printing objects delicacy.Rigid, Tough, High Performance 3D Printing Material 3d filament PETG 1.75 is a rigid, tough, high performance material, offering excellent clarity, light transmission and high gloss. It's about as stiff as PLA. and is highly resistant to temperatures at above 60?C(140?F).Recommended Printing Temp/Nozzle Temperature PETG 3d filament suggest printing temperature is 220-250?C - Base Plate Temperature: 70-80?C if no glue applied.99% FDM 3D Printer High Compatibility Compatible with 99% FDM 3D printers (with heated beds): Reprap, Afinia, MakerBot, PrintrBot, UltiMaker, Airwolf, Makergear, Up!, Lulzbot, Flashforge, Solidoodle, Delta, Mbot, Type A.SUNLU PETG 3D Printer FilamentSUNLU PLA Filament is are made of premium PLA material (Polylactic Acid), which boasts complete biodegradation and lower melting temperature, even does not need a heated bed, with no odor during the printing.It is suitable for fast printing and printing large-sized models, printed products have flat and smooth surfaces.FAQWhy can't the filaments stick to the hotbed easy?1). Check the temperature setting before printing, PETG filament temperature about 220-250;2). Check if the plate surface has been used for a long time, it is recommended to apply PVA glue;3). If the first layer has poor adhesion, it is recommended to re-level the print substrate to reduce the distance between the nozzle and the surface plate;

SUNLU 1KG Red PETG 3D Printer Filament 1.75mm PETG Red 1KG No Bubble +/-0.02mm

SUNLU PETG 3D Printer Filament PETG Filament 1.75mm Dimensional Accuracy +/- 0.02 mm 1 kg Spool PETG Red US-PETG-Red

SunLu Red PLA 1.75mm 3D Printing Filament 1KG (330 meters)

Achieve unique wood textures with wood PLA while ensuring strength and reliability. Elevate your 3D prints with our Wood PLA, PLA and PLA Mate.

PLA Filament 1.75mm Marble, SUNLU PLA 3D Printer Filament Stone Color

SHOP BEST PETG TRANSPARENT RED - 1.75MM, 1 KG SPOOLS – 3DFILAMENTS – 3DFilaments

Over 3kg Bundle PETG 1.75mm Filament 1kg/2.2lbs, Best PETG Filament. Australia / PETG Black

SUNLU 1.75MM PETG Filament Red Color 1KG/2.2LBS 3D Printer Consumables

Over 6kg of SUNLU Silk PLA 3D Printer Filament 1.75mm 1kg/2.2lbs

SUNLU provides filament silk in various colors. You can obtain different 3D printed results from these silk PLA filaments. Bulk sales are more affordable.

Over 3kg of SUNLU Silk Filament Silk PLA - SUNLU Official Online Store, USA / Silk White

R3D PLA 3D Printer Filament Red, Dimensional Accuracy 1.75 mm ± 0.02 mm, 1 kg Cardboard Spool (2.2 lbs), Fit Most FDM Printer 1-Pack… : Industrial & Scientific