Raspberry Pi e-ink Display Module - DFRobot

2.13”e-ink Display Module with ESP32 MCU Wiki - DFRobot

Raspberry Pi e-ink Display Module - DFRobot

FireBeetle Covers-ePaper Black&White Display Module - DFRobot

4.3 Inch E-Paper 800x600 - DFRobot

Buy e-ink Display Module for Raspberry Pi 4B/3B+/Zero W, DFR0591- DFRobot

Dual-channel RS485 Expansion Hat - for Raspberry Pi 4B - DFRobot DFR0824 Botland - Robotic Shop

LCD TFT 2.8 USB Display Module For Raspberry Pi (Seeed 800059001 - 104990015) DFROBOT DFR0275

2.13 e-ink Display Module with ESP32 MCU - DFRobot

This is 2.13inch E-Ink display HAT with Raspberry Pi 40PIN GPIO extension header, compatible with Raspberry Pi series boards, Jetson Nano. 250x122 resolution, Black and White Two Display colors, with embedded controller, communicating via SPI interface, supports partial refresh. No backlight, keeps displaying last content for a long time even when power down. Ultra low power consumption, basically power is only required for refreshing.

Waveshare 2.13inch E-Ink Display Hat V4 Version, Black/White Two-Color 250x122 Pixel E-Paper Module for Raspberry Pi 4B/3B+/3B/2B/Zero W/WH/Zero 2 W/Jetson

GitHub - DFRobot/DFRobot_RPi_Eink_Display