Overture PETG 3D Printer Filament 1.75mm -6pack – Overture 3D

Visit "About Us" page to see the complete version of this video. INTRODUCTION Overture PETG filaments are made of premium PETG resin which combines the advantages of PLA and ABS such as odorless, esay-to-print, little shrinkage rate; Outstanding toughness and high impact strength; Good liquidity (flows smoothly); High
Visit About Us page to see the complete version of this video. INTRODUCTION Overture PETG filaments are made of premium PETG resin which combines the advantages of PLA and ABS such as odorless, esay-to-print, little shrinkage rate; Outstanding toughness and high impact strength; Good liquidity (flows smoothly); High mechanical strength and excellent flexibility Over 8 years experience of researching and manufacturing 3D printer filaments, Overture care about every detail when we design our spool and filaments.? Buy with Confidence, 100% Satisfaction Guarantee. E-mail us if you have any issues or questions, we will make every effort to provide you with immediate help until you are satisfied. SPECIFICATIONS Young’s modulus (X-Y) 1472 ± 270 (MPa) Tensile strength (X-Y) 31.9 ± 1.1 (MPa) Elongation at break (X-Y) 6.8 ± 0.9 (%) Bending modulus 1174 ± 64 (MPa) Bending strength 53.7 ± 2.4 (MPa) Charpy impact strength 5.1 ± 0.3 (kJ/m2) FAQs: Why can't the filaments stick to the build bed? 1. Check the temperature setting before printing, PETG filaments have higher extrusion temperature than that of PLA; 2. Check if the plate surface has been used for a long time, it is recommended to replace it with our new one to ensure a strong first layer adhesion; 3. If the first layer has poor adhesion, it is recommended to re-level the print substrate to reduce the distance between the nozzle and the surface plate; 4. If the effect is not good, it is recommended to try printing the draft before printing.

OVERTURE PETG Filament 1.75mm,3D Printer Filament PETG,1kg Spool (2.2lbs),Dimensional Accuracy +/-0.03mm,Fit Most FDM Printer(Transparent) – BigaMart

Overture PETG Filament 1.75mm – OVERTURE EU

OVERTURE TPU Filament 1.75mm Flexible TPU Roll, 95A Soft 3D Printer Filament, 1kg Spool (2.2 lbs), Dimensional Accuracy +/- 0.02 mm (TPU Transparent) : Industrial & Scientific

PETG filaments are made of premium PETG plastic which combines the advantages of other filaments such as safe and odorless; little shrinkage rate;

OVERTURE PETG Filament 1.75mm with 3D Build Surface 200 x 200 mm 3D Printer Consumables, 1kg Spool (2.2lbs), Dimensional Accuracy +/- 0.05 mm, Fit

Still air vacuum sealed from the manufacturer please see photos

OVERTURE PETG 3D Printer Filament 1.75MM, Rock White 1kg New Hard To Find Color

Overture PETG Filament 1.75mm – OVERTURE EU

3D Printing Solutions > 3D Printer Store > Overture PLA+ Light Grey 1kg 1.75mm Filament

You will receive as shown in pictures New in open box Overture Petg 3D Printer Filament 1.75mm Light Gray. Please check measurements as sold as is

Overture Petg 3D Printer Filament 1.75mm Light Gray New Open Box

Overture TPU High Speed Filament 1.75mm Flexible 95A TPU Roll, 3D Printer Filament,Dimensional Accuracy +/- 0.03 mm, Fit Most FD

Overture PETG on an ender3? There is a lot of small stringing all around, and obviously the post is screwy. Printed at 215c and 70c .2mm layer height 20% infill on cura.