POE Splitter(Power Over Ethernet) – SyncSign

PoE-S911 PoE splitters enable data terminals that were not originally designed to accept power from the Ethernet, to be powered by Power over Ethernet

Centropower Active PoE Splitter Power Over Ethernet DC12V 1A For IEEE8

The POE-162S 802.3at Gigabit Power over Ethernet Plus Splitter complies with IEEE 802.3at PoE Plus standard that supports a maximum of 25.5W of input

POE-162S IEEE 802.3at Gigabit Power over Ethernet Plus Splitter (12V/24V)

802.3af PoE to microUSB Splitter with Gigabit Data on RJ45 Output

The Active PoE Splitter splits a PoE network cable from a PoE switch & PoE injector into a separate Power and Ethernet Data source Split POE (

IEEE 802.3af Active Power Over Ethernet PoE Splitter Adapter 48V to 12V for Surveillance Camera, Wireless AP Router Voip Phone, 10/100Mbps, 2-Pack

Centropower Active PoE Splitter Power Over Ethernet DC12V 1A For IEEE8 – UltraPoE

Splitters & Converters

TRINGKY Gigabit PoE Splitter Type-C IEEE 802.3af 10/100/1000Mbps Power over Ethernet for IP Camera and Raspberry PI

Output Power: 12V/1A, 15.4W, full IEEE 802.3af compliant. Widely use with most 12-volt devices. Input Power Voltage: DC 44-57V standard POE switches,

Active PoE Splitter - Power Over ethernet Splitter Adapter, 48V to 12V, IEEE 802.3af Compliant, 10/100Mbps PoE Splitter for Surveillance Camera, WAP

Gigabit PoE Splitter DC12V 2A IEEE 802.3af 10/100/1000Mbps Power over