E360 12V Battery Monitor Kit

The E360 Battery Monitor (coulomb counter) is a sophisticated energy fuel gauge designed to tell the user the state of charge of a battery or battery bank. The battery monitor is simple to use by providing essential battery and power system information on a single screen without the need to toggle between screens. The battery monitor can be used on a 12, 24, 36, and 48 V bank. The energy capacity level is displayed as an amp-hour figure and a percentage. A run-time clock tells the user time until the battery bank is full while charging and empty while discharging. Power going in and out of the battery bank is displayed as Adc and watts. The voltage level of the battery bank is also shown. The display backlighting will slowly pulsate when the battery bank is in a state of charge, with more energy going into the battery bank than out. The backlighting will be solidly lit when in a discharge state with more power going out of the battery bank than in. There will be no backlighting, but the numbers will still be visible when the battery bank is balanced between charge and discharge. The battery monitor is easy for any user to set up for monitoring as there are only four figures to program within the setup screen. A complete installation kit will include a 500 A shunt, display screen, 35' of data cable, shunt mounting bracket, 22 ga positive wire, and an install template. The E360 Battery Monitor includes a 24 month limited warranty.
Always know exactly how much capacity you have left down to the exact hours, minutes and seconds. Measures voltage, current, and capacity in real time and shows power consumption and replenishment. Simple to program, easy to install. Works with LiFePO4, lead acid, gel cell, and other lithium chemistry batteries. Percentage of capacity Available Amp hours Runtime clock Measures watts Measures Amps Measures volts Included:  Battery Monitor display screen Brass power measuring shunt 35 ft data cable (connects shunt to screen) Aluminum shunt bracket Small, 22-gauge positive power wire

Pmk360a Preventative Maintenance Kit For Newport E360 Pmk360a (new

✅ [LED Battery Monitor ] - The battery indicator is used to measure the remaining charge of the device. ✅ [Compatible with Multiple Voltage Types]

12V 24V 36V 48V 60V 72V LED Battery Monitor Meter BM210 Battery Fuel Gauge Indicator Waterproof Lead-Acid or Lithium ion Battery Meter for Cars Golf

MECHANIC E360 / E360 MAX Unlock Intelligent Film Cutting Machine

Test Voltage Range: 9-100V, Test Current Range: 0-150A(optional), Test Capacity Range: 0-99.9KAH, Test Power Range: 0-999999W, Time Recording

200A Battery Monitor with Hall Sensor for AGM and Lithium (LiFePO4) Batteries

200A Battery Monitor with Hall Sensor for AGM and Lithium (LiFePO4

MECHANIC E360 / E360 MAX Unlock Intelligent Film Cutting Machine

Upfitters

Expion360 Lithium Batteries For RV's - California RV Specialists

M3140-36DP 36V Trolling Battery Kit

E360 BATTERY MONITOR KIT

E360 BATTERY MONITOR KIT

Buy LiFePO4 Lithium Deep Cycle Battery - e360 Extreme Density | 120Ah 12.8V Group 27 by EXPION360 - Perfect for RV/Camper, Marine, Overland/Van, Solar

LiFePO4 Lithium Deep Cycle Battery - e360 Extreme Density | 120Ah 12.8V Group 27 by EXPION360 - Perfect for RV/Camper, Marine, Overland/Van, Solar and

12V Battery Capacity Monitor, DROK 10-100V 24V 36V 48V Digital