Victron IP22 Battery Charger Blue Smart Bluetooth
€ 24.99 · 4.8 (207) · In Magazzino
Di uno scrittore di uomini misteriosi
Victron IP22 Battery Charger is the wireless bluetooth solution to monitor voltage and current, to change settings and to update.
Victron IP22 Battery Chargers
Victron IP22 Battery Chargers are the latest professional battery charger with built-in bluetooth. The Victron IP22 Battery Charger can be used on devices in your workshop and on motor vehicles, such as (classic) cars; motorbikes; boats and camper-vans. *The IP22 does not include DC battery cables, we recommend purchasing Spartan Power 6AWG battery cable with the IP22 battery charger. *Battery cable is not included with the IP22, please check the datasheet for recommended battery cables!*
Bluetooth Smart
The Victron IP22 battery charger is the wireless solution to monitor voltage and current, to change settings and to update the charger when new features become available.
High efficiency
With up to 94% efficiency, these chargers generate up to four times less heat when compared to the industry standard. Once the battery is fully charged, power consumption reduces to 0.5 Watt, some five to ten times better than the industry standard.
Adaptive 6-stage charge algorithm: test -bulk –absorption-recondition–float –storage
The Blue Smart Charger features a microprocessor controlled ‘adaptive’ battery management. The adaptive feature will automatically optimize the charging process relative to the way the battery is being used.
Storage Mode: less maintenance and aging when the battery is not in use
The storage mode kicks in whenever the battery has not been subjected to discharge during 24 hours. In the storage mode float voltage is reduced to 2.2V/cell (13.2V for a 12V battery) to minimize gassing and corrosion of the positive plates. Once a week the voltage is raised back to the absorption level to ‘equalize’ the battery. This feature prevents stratification of the electrolyte and sulfation, a major cause of early battery failure.
charges Li-ion batteries
Li-ion batteries are charged with a simple bulk – absorption – float algorithm.
Fully discharged battery recovery function
Will initiate charging even if the battery has been discharged to zero volts. Will reconnect to a fully discharged Li-ion battery with internal disconnect function.
NIGHT and LOW setting
When in NIGHT or LOW mode, the output current is reduced to max. 50% of the nominal output and the charger will be totally noiseless. The NIGHT mode automatically ends after 8 hours. The LOW mode can be ended manually.
Protected against overheating
Output current will reduce as temperature increases up to 50°C, but the Blue Smart Charger will not fail.
Eleven LEDs for status indication
Charge algorithm: TEST / BULK / ABSORPTION / RECONDITION / FLOAT / STORAGE / READY. MODE button to set: NORMAL (14,4V) / HIGH (14,7V) / RECONDITION / LI-ION.
Victron IP22 Battery Charger Part Numbers:
12V 15A (1 Output) - BPC121545102
12V 15A (3 Output) - BPC121546102
12V 20A (1 Output) - BPC122045102
12V 20A (3 Output) - BPC122046102
12V 30A (1 Output) - BPC123047102
12V 30A (3 Output) - BPC123048102
24V 8A (1 Output) - BPC240845102
24V 12A (1 Output) - BPC241245102
24V 16A (1 Output) - BPC241647102
24V 16A (3 Output) - BPC241648102
BATTERY CHARGER- VICTRON IP65, 12V, 10 A
Victron Blue Smart IP22 Battery Charger 24v 3 Outputs
Victron Energy Blue Smart IP22 Charger 12/30(1) 120V NEMA 5-15 BPC123047102
Blue Smart IP22 Chargers AU/NZ
Adaptive, auto-optimized charging: A smart Victron battery charger for your RV, campervan, boat, yacht, motorbike, workshop, or other off-grid
Victron Energy Blue Smart IP22 Battery Charger 120V NEMA 5-15 | Bluetooth (Variations)
Blue Smart IP22 12VDC 30A 1 Bank 120V Charger – Dry Mount The Blue Smart IP22 Charger is the professional battery charger with built-in bluetooth. The Blue Smart IP22 Charger can be used on devices in your workshop and on motor vehicles, such as (classic) cars; motorbikes; boats and camper-vans. Bluetooth Smart The Blue Smart IP22 Charger is the wireless solution to monitor voltage and current, to change settings and to update the charger when new features become available.
Victron Blue Smart IP22 12VDC 30A 3 Bank 120V Charger - Dry Mount
Victron Energy Blue Smart IP22 12-Volt 30 amp 120VAC with single Output is the new professional battery charger with wireless solution to monitor
Victron Energy Blue Smart IP22 12-Volt 30 amp 120VAC, Single Output Battery Charger NEMA 5-15, Bluetooth
Victron Energy Blue Smart IP22 Battery Charger
Victron Blue Smart Battery Charger IP22 12V 30amp 1 Output Bluetooth - Victron Energy
Victron Energy Blue Smart IP22 12-Volt 30 amp 120VAC, Single Output Battery Charger NEMA 5-15, Bluetooth : Automotive
Victron Blue Smart IP22 24VDC 8A 1 Bank 120V Charger - Dry Mount
Blue Smart IP65 Charger (120V and 230V) - Victron Energy
Victron Energy Blue Smart IP22 12-Volt 30 amp 120VAC, Single Output Battery Charger NEMA 5-15, Bluetooth : Automotive
Victron Blue Smart IP22 12/20 (3) Charger 12V 20a 3 batteries