Pro Micro (USB-C Version) - 5V/16MHz - Arduino-compatible ATmega32U4 – Keebio

Spice up your DIY keyboard builds with this little microcontroller, which works with the TMK and QMK firmware. It's got 18 pins for you to work with. Note that this USB-C Pro Micro is longer than the Micro-USB Pro Micro by about 3mm. Also, due to the additional height of the USB-C port, your builds may require longer s

Spice up your DIY keyboard builds with this little microcontroller, which works with the TMK and QMK firmware. It's got 18 pins for you to work with.

• 
  

Note that this USB-C Pro Micro is longer than the Micro-USB Pro Micro by about 3mm. Also, due to the additional height of the USB-C port, your builds may require longer standoffs to allow it to fit inside of your case.

 

Spice up your DIY keyboard builds with this little microcontroller, which works with the TMK and QMK firmware. It's got 18 pins for you to work with. Note that this USB-C Pro Micro is longer than the Micro-USB Pro Micro by about 3mm. Also, due to the additional height of the USB-C port, your builds may require longer standoffs to allow it to fit inside of your case.  

Buy Type-C MINI USB Pro Micro For Arduino ATmega32U4 5V/16MHz 3.3V/8Mhz Module With 2 Row Pin Header Leonardo Usb Interface Board at Aliexpress for .

Type-C MINI USB Pro Micro For Arduino ATmega32U4 5V/16MHz 3.3V/8Mhz Module With 2 Row Pin Header Leonardo Usb Interface Board

Pro Micro (USB-C Version) - 5V/16MHz - Arduino-compatible ATmega32U4 – Keebio

RP2040 Pro Micro 16MB/128Mbit USB-C Controller – Keebio

Buy Type-C MINI USB Pro Micro For Arduino ATmega32U4 5V/16MHz 3.3V/8Mhz Module With 2 Row Pin Header Leonardo Usb Interface Board at Aliexpress for .

Type-C MINI USB Pro Micro For Arduino ATmega32U4 5V/16MHz 3.3V/8Mhz Module With 2 Row Pin Header Leonardo Usb Interface Board

Alternatives · joric/nrfmicro Wiki · GitHub

SuperMini nRF52840 Pro Micro Bluetooth LE (BLE) Controller – Keebio

Afternoon Labs Breeze Keyboard Kit – Keebio

Simple breakout board for Micro-USB. Breaks out VBUS (5V), GND, D-, D+, and ID., Pitch spacing between the pins is 0.1” (2.54mm).

Micro-USB Breakout Board

Elite-C - Deskthority wiki

Liked the original Elite-C but think it’s a bit too tall for you? We heard you loud and clear, so we replaced the original USB-C port with a mid-mount

Elite-C V4 - USB-C Pro Micro Replacement ATmega32u4